Look up your product in the tables below and click on pdf to see more information.


Product Documents

PRODUCT TDS Documents SDS Part A SDS Part B SDS Part C
102.05 Primer SG Gray (Self-etching) (PDF) 102.05 (PDF) 102.05
141.07 Acrylic Enamel White (PDF) 141.07 (PDF) 141.07 (PDF) 050.23 Hardener (Optional)
141.110 Acrylic Enamel HS White (PDF) 141.110 (PDF) 141.110 (PDF) 050.43 Hardener (Optional)
330.18 Wilkopon CW Activator 4:1 (PDF) 330.29 (PDF) 330.29 (PDF) 330.18B (PDF) 330.18C
330.29 Wilkopon HS Clear (PDF) 330.29 (PDF) 330.29 (PDF) 330.18B (PDF) 330.18C
331.15 Wilkopon Mastic White Epoxy (Click here for more) (PDF) 331.15 (PDF) 331.15A (PDF) 331.15B (PDF) 331.15C
331.29 Wilkopon HS White Epoxy (For black use 336.10) (PDF) 331.29 (PDF) 331.29 (PDF) 330.18B (PDF) 330.18C
331.3215 Wilkopon Epoxy Novolac White (PDF) 331.3215 (PDF) 331.3215B
331.46 Gator-Kure “K” White Epoxy (Click here for more) (PDF) 331.46 (PDF) 331.46A (PDF) 331.46B (PDF) 331.46C
331.50 Wilkopon HS White Epoxy (PDF) 331.50A (PDF) 331.50A (PDF) 330.44B
332.25 Wilkopon Gray SF FC Epoxy (Self Leveling Epoxy) (PDF) 332.25 (PDF) 332.25A (PDF) 332.25B
332.3215 Wilko Novolac Gray (PDF) 332.3215 (PDF) 332.3215 SDS (PDF) 3215B SDS
332.54 Wilkopon Mastic Gray Epoxy (For red use 337.61) (PDF) 332.54 (PDF) 332.54A (PDF) 332.54B (PDF) 332.54C
332.57 Wilkopon F Mastic Pearl Gray Epoxy (Flexible) (PDF) 332.57 (PDF) 332.57A (PDF) 332.57B
332.100 Wilkopon 100 % Epoxy (High Heat Epoxy Phenolic) (PDF) 332.100 (PDF) 332.100 (PDF) 332.100B
332.111 Wilkopon HS Light Gray Epoxy (PDF) 332.111 (PDF) 332.111 (PDF) 330.18B (PDF) 330.18C
332.140 Wilkopon Epoxy Novolac (High Heat Epoxy) (PDF) 332.140 (PDF) 332.140 (PDF) 332.140B
333.58 Wilkopon HS Safety Yellow (PDF) 333.58 (PDF) 333.58 (PDF) 330.18B (PDF) 330.18C
336.07 Wilkopon Coal Tar Epoxy (PDF) 336.07 (PDF) 336.07 (PDF) 336.07B
336.10 Wilkopon HS Black Epoxy (PDF) 336.10 (PDF) 336.10 (PDF) 330.18B (PDF) 330.18C
336.12 Wilkopon Coal Tar Epoxy
Click Here for More
(PDF) 336.12
(PPT)
(PDF) 336.12 (PDF) 336.12B
336.26 Wilkopon Mastic Black Epoxy (PDF) 336.26 (PDF)336.26A (PDF) 336.26B
336.36 Gator-Kure “K” Tar Epoxy (PDF) 336.36 (PDF)336.36A (PDF) 336.36B
337.61 Wilkopon Mastic Tile Red (PDF) 337.61 (PDF)337.61A (PDF) 337.61B
339.03 Wilkopon Mastic Aluminum (PDF) 339.03 (PDF) 339.03A (PDF) 339.03B (PDF) 339.03C
341.46 Wilkopon HS Primer White (PDF) 341.46 (PDF) 341.46A (PDF) 341.46C
342.22 Wilkopon Primer Gray (PDF) 342.22 (PDF) 342.22 (PDF) 342.22B (PDF) 342.22C
342.46 Wilkopon HS Primer Gray (PDF) 342.46 (PDF) 342.46A (PDF) 342.46B (PDF) 342.46C
342.66 Wilkopon HS Primer Gray (PDF) 342.66A
347.49 Wilkopon Primer Red (PDF) 347.49 (PDF) 347.49 (PDF) 347.49B (PDF) 347.49C
347.62 Wilkopon HS Primer Beige (PDF) 347.62 (PDF) 347.62A (PDF) 347.62B (PDF) 347.62C
347.67 Wilkopon HS Primer Red (PDF) 347.67 (PDF) 347.67A (PDF) 347.67B (PDF) 347.67C
349.07 Zinc Rich Primer (PDF) 349.07 (PDF) 349.07 (PDF) No Activator Needed
349.10 Wilkopon Zinc Rich Primer (PDF) 349.10 (PDF) 349.10 (PDF) 349.10B (PDF) 349.10C
349.13 Wilkopon Zinc Rich Primer (PDF) 349.13 (PDF) 349.13 (PDF) 349.13B (PDF) 349.13C
349.23 Wilkopon Zinc Rich Primer (PDF) 349.23 (PDF) 349.23 (PDF) 349.23B (PDF) 349.23Z
369.01 Phenolic Aluminum (PDF) 369.01 (PDF) 369.01
461.08 Enamel HS LF Tank White (PDF) 461.08 (PDF) 461.08 (PDF) 050.43 Hardener (Optional)
461.14 Enamel HS LF White (PDF) 461.14 (PDF) 461.14 (PDF) 050.43 Hardener (Optional)
462.440 Enamel HS LF Gray #16440 (PDF) 462.440 (PDF) 462.440 (PDF) 050.43 Hardener (Optional)
466.01 Enamel HS LF Black (PDF) 466.01 (PDF) 466.01 (PDF) 050.43 Hardener (Optional)
481.07 Enamel Spray White (PDF) 481.07 (PDF) 481.07 (PDF) 050.23 Hardener (Optional)
492.22 Primer Corrosion Inhibitive Gray (PDF) 492.22 (PDF) 492.22
492.24 Primer Corrosion Inhibitive Gray (PDF) 492.24 (PDF) 492.24
492.42 Primer HS Corrosion Inhibitive Gray (PDF) 492.42 (PDF) 492.42
492.43 Primer HS Corrosion Inhibitive Gray (PDF) 492.43 (PDF) 492.43
497.35 Primer Corrosion Inhibitive Red (PDF) 497.35 (PDF) 497.35
497.50 Primer HS Corrosion Inhibitive Red (PDF) 497.50 (PDF) 497.50
497.105 Primer HS LF CI Red (PDF) 497.105 (PDF) 497.105
497.108 Primer HS LF CI Red (Lacquer Resistant) (PDF) 497.108 (PDF) 497.108
601.01 Strippable Coating White (PDF) 601.01 (PDF) 601.01
603.08 Primer Vinyl Wash (PDF) 603.08 (PDF) 603.08A (PDF) 603.08B
702.15 Wilkothane Primer Sealer (PDF) 702.15 (PDF) 702.15 (PDF) 050.06
717.30 Wilkothane HS Saddle Tan (PDF) 717.30 (PDF) 717.30 (PDF) 050.25
720.05 Wilkothane Clear Polyurethane (Single Component) (PDF) 720.05 (PDF) 720.05 (PDF) 050.43 Hardener (Optional)
720.07 Wilkothane G Clear (PDF) 720.07 (PDF) 720.07 (PDF) 050.06
720.18 Wilkothane HS Clear (PDF) 720.18 (PDF) 720.18 (PDF) 050.25
720.29 Wilkothane HS MR Clear (PDF) 720.29 (PDF) 720.29 (PDF) 050.25
720.44 Wilkothane HS Clear (PDF) 720.44 (PDF) 720.44 (PDF) 050.25
721.11 Wilkothane G White (PDF) 721.11 (PDF) 721.11 (PDF) 050.06
721.22 Track Thane White (Single Component) (PDF) 721.22 (PDF) 721.22 (PDF) 050.43 Hardener (Optional)
721.23 Wilkothane S White (PDF) 721.23 (PDF) 721.23 (PDF) 050.07 (PDF) 050.09
721.52 Wilkothane HS White (PDF) 721.52 (PDF) 721.52 (PDF) 050.25
721.95 Wilkothane HS White (PDF) 721.95 (PDF) 721.95 (PDF) 050.35
721.154 Wilkothane HS Whit #17875 (PDF) 721.154 (PDF) 721.154 (PDF) 050.25
721.195 Wilkothane HS White (PDF) 721.195 (PDF) 721.195 (PDF) 050.135
722.72 Wilkothane HS Aluminum Gray (PDF) 722.72 (PDF) 722.72 (PDF) 050.25
722.73 Wilkothane HS Pearl Gray (PDF) 722.73 (PDF) 722.73 (PDF) 050.25
722.76 Wilkothane HS Transco Gray (PDF) 722.76 (PDF) 722.76 (PDF) 050.25
722.102 Wilkothane HS Boardwalk Gray (PDF) 722.102 (PDF) 722.102 (PDF) 050.25
722.125 Wilkothane HS Gray (PDF) 722.125 (PDF) 722.125 (PDF) 050.25
722.236 Wilkothane HS Gemoa Gray (PDF) 722.236 (PDF) 722.236 (PDF) 050.25
722.440 Wilkothane HS Gray #16440 (PDF) 722.440 (PDF) 722.440 (PDF) 050.25
723.85 Wilkothane HS Yellow (PDF) 723.85 (PDF) 723.85 (PDF) 050.25
723.92 Wilkothane HS Intl. Orange (PDF) 723.92 (PDF) 723.92 (PDF) 050.25
723.94 Wilkothane HS Focal Yellow (PDF) 723.94 (PDF) 723.94 (PDF) 050.25
723.95 Wilkothane HS TG Yellow (PDF) 723.95 (PDF) 723.95 (PDF) 050.25
723.655 Wilkothane HS Yellow #13655 (PDF) 723.655 (PDF) 723.655 (PDF) 050.25
724.113 Wilkothane HS Safety Red (PDF) 724.113 (PDF) 724.113 (PDF) 050.25
724.350 Wilkothane HS Red #11350 (PDF) 724.350 (PDF) 724.350 (PDF) 050.25
725.86 Wilkothane HS Safety Blue (PDF) 725.86 (PDF) 725.86 (PDF) 050.25
726.10 Wilkothane G Black (PDF) 726.10 (PDF) 726.10 (PDF) 050.06
726.16 Wilkothane HS Black (PDF) 726.16 (PDF) 726.16 (PDF) 050.25
727.119 Wilkothane HS Enogex Beige (PDF) 727.119 (PDF) 727.119 (PDF) 050.25
728.81 Wilkothane HS Mint Green (PDF) 728.81 (PDF) 728.81 (PDF) 050.25
728.84 Wilkothane HS Spotlite Green (PDF) 728.84 (PDF) 728.84 (PDF) 050.25
728.140 Wilkothane HS Transco Green (PDF) 728.140 (PDF) 728.140 (PDF) 050.25
728.162 Wilkothane HS Shale Green (PDF) 728.162 (PDF) 728.162 (PDF) 050.25
728.260 Wilkothane HS Green #14260 (PDF) 728.260 (PDF) 728.260 (PDF) 050.25
729.907 Wilkothane G Silver Metallic (PDF) 729.907 (PDF) 729.907 (PDF) 050.06
729.935 Wilkothane HS Aluminum (PDF) 729.935 (PDF) 729.935 (PDF) 050.25
729.940 Wilkothane HS Alum. Metallic (PDF) 729.940 (PDF) 729.940 (PDF) 050.25
761.15 Wilkodure White (PDF) 761.15 (PDF) 761.15 (PDF) 060.15
781.01 Wilkofast White (PDF) 781.01 (PDF) 781.01 (PDF) 060.02
782.37 Wilkofast Engine Gray (PDF) 782.37 (PDF) 782.37 (PDF) 060.10
809.01 Silicone Zinc Rich Primer (PDF) 809.01 (PDF) 809.01 (PDF) 809.01B
821.02 Modified Silicone White (PDF) 821.02 (PDF) 821.02
820-Series HS Silicone Alkyd (PDF) 820-Series HS SA (PDF) 821.04 (PDF) 050.43 Hardener (Optional)
821.04 Silicone Alkyd HS White (PDF) 821.04 (PDF) 821.04 (PDF) 050.43 Hardener (Optional)
822.440 Silicone Alkyd HS Gray #16440 (PDF) 822.440 (PDF) 822.440 (PDF) 050.43 Hardener (Optional)
826.01 Modified Silicone Black (PDF) 826.01 (PDF) 826.01
826.02 Silicone Alkyd HS LF Black (PDF) 826.02 (PDF) 826.02 (PDF) 050.43 Hardener (Optional)
829.01 Modified Silicone Aluminum (PDF) 829.01 (PDF) 829.01
836.01 Silicone Flat Black (PDF) 836.01 (PDF) 836.01
846.01 Silicone Black (PDF) 846.01 (PDF) 846.01
849.01 Silicone Aluminum (PDF) 849.01 (PDF) 849.01
859.06 Primer Inorganic Zinc Rich (PDF) 859.06 (PDF) 859.06 (PDF) 859.06B
931.02 Acrylic Latex White (PDF) 931.02 (PDF) 931.02
931.55 Elastomeric Acrylic Latex White (PDF) 931.55 (PDF) 931.55
941.05 WB Enamel Acrylic White (PDF) 941.05 (PDF) 941.05
1011.01 Wilkoshield White (Tough, abrasion resistant finish) (PDF) 1011.01 (PDF) 1011.01 (PDF) 1011.01B
1011.05 Wilkoshield VE White (Tough, chemical resistant) (PDF) 1011.05 (PDF) 1011.05 (PDF) 1011.05B
9721.03 WB Urethane Pure White (PDF) 9721.03 (PDF) 9721.03

Miscellaneous Publications

Miscellaneous Publications Thinners MSDS Misc: Hardeners, Accelerators
(PDF) Troubleshooting Tips
(PDF) Coating Inspection Practices
(PDF) Wilkothane Activators and Hardeners No.1 Synthetic Spray (PDF) No. 1 (PDF) 050.23 Hardener
(PDF) Wilkopon Products No.2 Synthetic Thinner (PDF) No.2 (PDF) 050.43 Hardener
(PDF) Wilko Thinners and Retarders No.10 Thinner (PDF) No.10 (PDF) T012 Urethane Accelerator
(PDF) Miscellaneous Products No.13 Thinner (PDF) No.13 (PDF) T022 Urethane Accelerator
(PDF) Surface Preparation Specs (SSPC & NACE)
(PDF) Surface Preparation Guide No.22 Vinyl Thinner (PDF) No.22 (PDF) 850.05 Fish Eye Eliminator
(PDF) Coating Concrete & Concrete Surface Prep No.24 Wash Primer Thinner (PDF) No.24 (PDF) 090.09 Skid Resistant Additive
(PDF) Painting Galvanized Steel No.25 Spray Thinner (PDF) No.25 (PDF) 850.44 Pot Life Extender
(PDF) Brochure
(PDF) Recoating Epoxy-Urethane
No.44 Wilkothan e Thinner (PDF) No.44
Select Coating Systems Tab Above No.71 Epoxy Thinner (PDF) No.71
(PDF) Custom Color Chart* See note below No.101 Urethane Retarder (PDF) No.101
(PDF) Standard Environmental Chart* See note below No.104 Solv Prep (PDF) No.104
(PDF) Industrial Color Card* See note below No.145 Retarder Thinner (PDF) No.145
(PDF) Pantone Colors* See note below No.158 Thinner (PDF) No.158
(PDF) RAL Colors* See note below
(PDF) RAL Chart
(PDF) Painting Project Daily Data Log
(HTML)
Federal Colors Link (colorserver.net)
* Due to variations in digital imaging, colors shown on the chart are not the true representation of the actual color

Coating Systems

COATING SYSTEM SURFACE DESCRIPTION APPLICATION COATING DESCRIPTION PRIMER INTERMEDIATE OR COLOR COAT TOPCOAT OR CLEAR COAT
(PDF) Index
(PDF) No .2 Exterior above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200° F. A solvent-based inorganic zinc-rich primer, one high solids epoxy intermediate coat, and a two component acrylic polyurethane topcoat.
859.06
Inorganic Zinc-Rich Primer

347.67
Wilkopon HS Primer Red

721.52
Wilkothane HS White (or colors)
(PDF) No. 3 Exterior above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200° F. An organic zinc-rich primer, one HS epoxy intermediate coat and a two-component acrylic polyurethane topcoat.
349.10
Organic Zinc-Rich Epoxy Primer

347.67
Wilkopon HS Primer Red

721.52
Wilkothane HS White (or colors)
(PDF) No. 4 Surface previously coated with conventional alkyd or silicone alkyd judged to be in sufficiently good condition to upgrade with urethane or epoxy top coats. Two component epoxy polyamide “barrier coat” primer and selected high performance top coat.
347.67
Wilkopon HS Primer Red OR342.46 Wilkopon Primer Beige

721.52
Wilkothane HS White (or colors)
(PDF) No. 4B Previously painted compressor engines coated with conventional alkyd enamels. Also ferrous metals subject to chemical, moisture, oils, glycol, or other contaminant attack. Surface temperature operating to 250º F. Fast dry epoxy prime coat with a two component polyurethane topcoat for application to prepared steel surfaces. This coating system will provide outstanding chemical resistance, excellent weatherability, color and gloss retention, and corrosion resistance.
342.45
Wilkopon LVOC Primer Gray

721.52
Wilkothane HS White (or colors)
(PDF) No. 5 Exterior, above-ground, steel structures, piping, vessels, tanks, process facilities operating to 200º F. High-solids epoxy aluminum mastic primer coat and a high solids acrylic urethane top coat for application to marginally prepared or well prepared steel surfaces. Also may be used as a repair system for damaged urethane coating. Excellent weatherability, gloss and color retention, and corrosion resistance.
339.03
Wilkopon Mastic Aluminum

721.52
Wilkothane HS White (or colors)
(PDF) No. 7 Exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F. Ideal for surfaces that are subject to condensation. High solids epoxy mastic prime coat for application to minimally prepared steel surfaces. Also as a repair system for damaged urethane coatings. May be applied to previously painted surfaces. Excellent corrosion resistance.
339.03
Wilkopon Mastic Aluminum
(PDF) No. 7A Unpainted concrete floors, walls, pits, etc. previously painted concrete may be recoated after proper surface preparation. New concrete must cure for a least 30 days prior to painting. (See Concrete Floor Section) Primer coat of gray epoxy primer and a finish coat of a two-component, high solids epoxy mastic.
342.45
Wilkopon LVOC Primer Gray

331.15
Wilkopon Epoxy Mastic White (or other colors)
(PDF) No. 8 Typically used for new facility piping under 170º F (meter runs, regulator runs, valves, above ground appurtenances, and other natural gas facilities which do not exceed 170º F). A solvent-based inorganic zinc-rich primer, and one high solids epoxy mastic topcoat.
859.06
Inorganic Zinc-Rich Primer

339.03
Wilkopon Mastic Aluminum
(PDF) No. 9 Ferrous metal surfaces subject to mild or moderate industrial environments. Exterior or interior environments to 200º F. May be used to recoat old, conventional paints. Conventional alkyd primer and a phenolic aluminum topcoat.
497.50
HS Corrosion Resisting Red Primer

369.01
Phenolic Aluminum OR369.09 HS Phenolic Aluminum
(PDF) No. 10 Ferrous metal surfaces subject to mild or moderate industrial environment. Exterior or interior condition to 200º F. May be used to recoat old, tightly adhering conventional paints. High solids alkyd primer and a high solids phenolic aluminum topcoat. 497.105 or 497.50 HS Corrosion Resisting Red Primer 369.09 HS Phenolic Aluminum
(PDF) No. 11 Above ground steel structures, piping, vessels, tanks, towers, or processing facilities operating to 200º F. Two coats of coal tar epoxy. Designed for resistance to severe corrosive atmospheres.
336.07
Wilkopon Coal Tar Epoxy

336.07
Wilkopon Coal Tar Epoxy
(PDF) No. 12 Above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F. Epoxy high solids polyamide primer and two coats of coal tar epoxy. Designed for resistance to severe corrosive atmospheres or below-grade application.
347.67
Wilkopon HS Primer Red OR342.46 Wilkopon Primer Beige
336.07 Wilkopon Coal Tar Epoxy
(PDF) No. 15 Steel surfaces operating with skin temperatures from 400º F to 1000º F. Examples: Turbine and engine exhaust systems, mufflers, stacks, hot piping, etc. Solvent-based silicone zinc primer with a “tack coat” and topcoat of high heat silicone aluminum (1000º F).
809.01
Silicone Zinc-Rich Primer

849.01
Silicone Aluminum (or other colors)
(PDF) No. 16 Steel surfaces operating from 200º F to 400º F. Moderate to severe exposure conditions. To be used where an aluminum-colored paint is not desirable (hot discharge bottles and piping, hot glycol lines, etc.). Fabricator friendly. Modified silicone gray primer and silicone acrylic top coat (Modified Silicone White and colors). This system will air dry to allow fabrication off-site and shipment to property with minimal damage.
802.01
Modified Silicone Gray Primer
821.02 Modified Silicone White (or other colors)
(PDF) No. 17 Exterior, above ground steel structures, piping, vessels, tanks, and towers. Operating temperatures to 1000º F. A high performance system with excellent corrosion resistance. The coating system consists of an inorganic zinc-rich primer and high-heat silicone topcoat.
859.06
Inorganic Zinc-Rich Primer
849.01 Silicone Aluminum (or other colors)
(PDF) No. 18 Ferrous metal surfaces subject to mild or moderate industrial environments. Exterior or interior environments to 200º F. May be used to recoat old, conventional paints. A high solids alkyd corrosion resisting primer and gloss enamel topcoat.
497.50
HS Corrosion Resisting Red Primer

461.14
Enamel Gloss White (or other 460- colors)
(PDF) No. 19 Ferrous metal surfaces subject to mild or moderate industrial environments. Exterior or interior environments to 200º F. May be used to recoat old, conventional paints. Alkyd high solids primer and silicone alkyd topcoat.
497.50
HS Corrosion Resisting Red Primer

821.04
Silicone Alkyd White (or other colors)
(PDF) No. 21 Interior or exterior above ground concrete structures, basement walls, interior and exterior transite, galvanized or primed metal, and wood structures, exposed to ambient conditions. Water borne exterior acrylic latex designed for ease of application and superior performance.
907.15
WB Primer Red OR902.13 Gray)

931.02
WB Acrylic Latex White (or other colors)
(PDF) No. 22 New or weathered galvanized metal, aluminum or aluminum-coated metal operating to 170º F. Vinyl wash primer and selected top coat, usually alkyd, silicone alkyd, latex or a high performance epoxy or urethane.
603.08
Vinyl Wash Primer
331.29
Wilkopon Epoxy White OR461.14 Enamel Gloss White (or other 460- colors) OR
721.52
Wilkothane HS White (or other colors) OR821.04 Silicone Alkyd White (or other colors) OR931.02 WB Acrylic Latex White (or other colors)
(PDF) No. 23 Unpainted concrete floors, walls, pits, etc. Previously painted concrete may be recoated after proper surface preparation. (See Concrete Floor Section). Two component, solvent-based epoxy polyamide high solids coating.
342.22
Wilkopon Primer Gray
331.29
Wilkopon Epoxy White OR
332.111 Wilkopon HS Floor Gray
(PDF) No. 24 Typically used for new facility piping under 200º F (meter runs, valves, above ground appurtenances, and other natural gas facilities which do not exceed 200º F). An inorganic zinc-rich primer, one HS epoxy intermediate coat and a two-component HS acrylic polyurethane topcoat.
859.06
Inorganic Zinc-Rich Primer
(PDF) No. 25 Previously Painted* exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F, up to 250º F intermittent. High solids epoxy prime coat with a high solids two-component acrylic polyurethane topcoat for application to prepared steel surfaces. Also as a repair system for damaged urethane coatings. Excellent weatherability, color and gloss retention, and corrosion resistance.
347.67
Wilkopon HS Primer Red OR
342.46 Wilkopon Primer Beige

721.52
Wilkothane HS White (or other colors)
(PDF) No. 25A Previously Painted* Exterior, above ground steel structures, piping, vessels, tanks, or process facilities operating to 200º F, up to 250º F intermittent. High solids epoxy prime coat with a high solids two-component acrylic polyurethane topcoat for application to prepared steel surfaces as a repair
347.67
Wilkopon HS Primer Red OR
342.46 Wilkopon Primer Beige

721.52
Wilkothane HS White (or other colors)
(PDF) No. 26 Exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F. High solids epoxy mastic prime coat with two component acrylic polyurethane topcoat for application to minimally prepared steel surfaces. Also as a repair system for damaged urethane coatings. May be applied to previously painted surfaces. Excellent weatherability, color and gloss retention, and corrosion resistance. 339.03 Wilkopon Aluminum Mastic OR332.54 Wilkopon Pearl Gray Mastic
721.52
Wilkothane HS White (or other colors)
(PDF) No. 27A Ferrous metal surfaces subject to mild or moderate industrial environments. Exterior or interior environments to 200º F. May be used to recoat old, conventional paints. Alkyd high solids primer and silicone alkyd topcoat.
497.50
HS Corrosion Resisting Red Primer

821.04
Silicone Alkyd White (or other colors)
(PDF) No. 28 Exterior above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F. A high solids organic zinc-rich primer, one HS expoxy intermediate coat and a high solids polyurethane topcoat (all two component systems)
349.10
Organic Zinc-Rich Epoxy Primer

721.52
Wilkothane HS White (or other colors)
(PDF) No. 29 Exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F, up to 250º F intermittent. High solids recoatable epoxy prime coat with a high solids two-component acrylic polyurethane topcoat for application to prepared steel surfaces. Also as a repair system for damaged urethane coatings. Excellent weatherability, color and gloss retention, and corrosion resistance.
342.46
Wilkopon HS Primer Gray
(PDF) No. 29A Exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F, up to 250º F intermittent. High solids recoatable epoxy prime coat with a high solids two-component acrylic polyurethane topcoat for application to prepared steel surfaces. Also as a repair system for damaged urethane coatings. Excellent weatherability, color and gloss retention, and corrosion resistance.
342.46
Wilkopon HS Primer Gray (or 347.67 Wilkopon Recoatable HS Primer Red)
(PDF) No. 30 Unpainted concrete floors, walls, pits, etc. Previously painted concrete may be recoated after proper surface preparation. (See Concrete Floor Section) Two component 100% solids epoxy polyamide coating, solvent-based.
332.74
Wilkopon HS Gray (or color).
(PDF) No. 31 Structural steel or piping that will located below grade (buried in soil) One coat application of 100% solids fiberglass-flake filled polyester or vinyl ester resin, providing an almost impermeable coating and exhibiting outstanding abrasion, solvent and chemical resistance in severe environment. None required
(PDF) No. 32 Exterior, above ground steel structures, steel buildings, piping, vessels, tanks, towers, or process facilities operating to 200º F. Used for exterior surfaces steel in industrial areas. Primer can be used as a barrier coat for old but sound conventional coatings for subsequent topcoating with coating systems that may contain strong solvents such as epoxies, polyurethanes, vinyls, alkyds, and lacquers.
607.17
Universal Primer Red (available in Beige, Gray)
(PDF) No. 32A Interior Tank Lining 100% Solids Novolac
(PDF) No. 32B Interior Tank Lining Novolac
(PDF) No. 32C Tank Lining – Food Storage Novolac
(PDF) No. 36 Indoor or outdoor above ground steel structures, piping, vessels, tanks, towers, process facilities, etc., operating to 200º F. Water borne inhibitive red oxide primer and water borne acrylic gloss topcoat.
907.15
WB Primer Red (or 902.13 Gray)
(PDF) No. 43 Interior or exterior above ground steel structures, piping, vessels, tanks, towers, process facilities, etc., operating to 200º F. Water borne inhibitive red oxide primer and water borne acrylic gloss topcoat.
907.15
WB Primer Red (or 902.13 Gray)
(PDF) No. 46 Exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F. Ideal for surfaces that are subject to condensation where added corrosion, impact and abrasion resistance is required. High solids epoxy mastic prime coat for application to minimally prepared steel surfaces. Also as a repair system for damaged urethane and mastic coatings. Maybe be applied to previously painted surfaces. Excellent corrosion resistance. Coated pipes may be buried after 30 minute’s cure time at 75º F. May be applied at temperatures as low as 35º F.
336.36
Wilko Gator-Kure Coal Tar or 331.46 White
(PDF) No. 47
(PDF) No. 48
(PDF) ISO 12944-5-C2
(PDF) ISO 12944-5-C3
(PDF) ISO 12944-5-C4
(PDF) ISO 12944-5-C5


Credit Cards Accepted

WILKO PAINT, INC. / 2727 OHIO / WICHITA, KANSAS 67204-0089, U.S.A. PHONE (316) 838-4288 / FAX(316) 838-6328
Mon-Fri 8:00AM-4:00PM CST